Paint adhesive removal
Introduction
Use this guide to safely remove adhesive from your car's paintwork.
1. Equipment
Gather the following equipment to complete this guide. The links below direct you to the exact products I used.
Some links below are affiliate links. I may earn a small commission at no extra cost to you. As an Amazon Associate, I earn from qualifying purchases.
2. Remove
-
Apply about 2ml of adhesive remover to the adhesive and let it sit for at least 3 minutes.
-
If the adhesive is quite viscous, use a plastic scraper to loosen most of it.
-
Next, wipe down the remainder of the adhesive with a paper towel.
-
Repeat steps 1 - 3 until all adhesive is removed.
3. Clean
-
After most of the adhesive has been removed, apply a little isopropyl alcohol and wipe it down with some paper towel to remove any excess adhesive remover.
🏁 Conclusion
With Koch Chemie Tea, removing adhesive is really effective. However, if like me, you used Gorilla tape to secure a temporary tarp roof, it'll probably take 3 or 4 attempts of step 2 to fully remove all the adhesive.